Clutch Pedal Switch Installation


  1. INSTALL CLUTCH START SWITCH ASSEMBLY

  2. INSPECT CLUTCH START SWITCH ASSEMBLY

Clutch Pedal Switch -- Installation



1. INSTALL CLUTCH START SWITCH ASSEMBLY

  1. for LHD:

    1. Install the clutch start switch assembly with the nut.

      Torque:
      16 N*m{160 kgf*cm, 12 ft.*lbf}

    2. Connect the clutch start switch connector.

  1. for RHD:

    1. Install the clutch start switch assembly with the nut.

      Torque:
      16 N*m{160 kgf*cm, 12 ft.*lbf}

    2. Connect the clutch start switch connector and attach the clamp.



2. INSPECT CLUTCH START SWITCH ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Clutch.Clutch System.Clutch Pedal Switch Installation

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    1 - 2
    		On (Pushed)
    		Below 1 Ω
    1 - 2
    		Off (Not pushed)
    		10 kΩ or higher
    Text in Illustration
    *a
    		Component without harness connected
    (Clutch Start Switch Assembly)
    *b
    		On: 7.65 to 8.35 mm (0.302 to 0.328 in.)
    *c
    		Off: 1.65 to 2.35 mm (0.0650 to 0.0925 in.)
    If the result is not as specified, replace the clutch start switch assembly.