Clutch Pedal (For Lhd) -- Installation |
| 1. INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH |
 |
Apply MP grease to the inside of a new clevis bush.
Text in Illustration *1 MP grease
Install the clevis bush to the clutch pedal.
- HINT:
- Install the clevis bush from the left side of the vehicle.
| 2. INSTALL CLUTCH PEDAL TURNOVER BUSH |
 |
Apply MP grease to the turnover bush.
Text in Illustration *1 MP grease
Install the turnover bush to the clutch pedal.
| 3. INSTALL NO. 1 CLUTCH PEDAL CUSHION |
Install the 3 cushions to the clutch pedal.
| 4. INSTALL CLUTCH PEDAL SHAFT COLLAR |
 |
Apply MP grease to the shaft collar.
Text in Illustration *1 MP grease
Install the shaft collar to the clutch pedal.
| 5. INSTALL CLUTCH PEDAL BUSH |
 |
Apply MP grease to 2 new bushes.
Text in Illustration *1 MP grease
Install the 2 bushes to the clutch pedal.
| 6. INSTALL CLUTCH PEDAL PAD |
| 7. INSTALL CLUTCH PEDAL STOPPER BOLT (for 5L-E and 1GR-FE without Cruise Control) |
Install the stopper bolt and temporarily install the lock nut.
- HINT:
- Tighten the lock nut to the specified torque when adjusting the clutch pedal.
| 8. INSTALL CLUTCH SWITCH ASSEMBLY |
Install the clutch switch and temporarily install the lock nut.
- HINT:
- Tighten the lock nut to the specified torque when adjusting the clutch pedal.
| 9. INSTALL CLUTCH PEDAL SPRING HOLDER |
 |
Apply MP grease to the contact surface of the spring holder.
Text in Illustration *1 MP grease
Install the spring holder.
| 10. INSTALL CLUTCH PEDAL SUB-ASSEMBLY |
Install the clutch pedal and washer to the clutch pedal support with the nut and bolt.
- Torque:
- 34 N*m{350 kgf*cm, 25 ft.*lbf}
- HINT:
- Install the bolt from the left side of the vehicle.
| 11. INSTALL TURN OVER SPRING SEAT COMPRESSION SPRING |
Install the compression spring to the clutch pedal and spring holder.
| 12. INSTALL CLUTCH MASTER CYLINDER ASSEMBLY |
Install the clutch master cylinder (LandCruiser RM00000174800TX.html).