Oil Pump Reassembly

Place the timing belt case on wooden blocks.

NOTICE:

Do not damage the timing pointer.

Insert the drive and driven gears into the timing belt case with the marks facing the oil pump cover side.

Apply adhesive to 2 or 3 threads of the screws.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

Install the oil pump cover with the 8 screws.

Torque:

10 N*m{105 kgf*cm, 8 ft.*lbf}

Insert the relief valve and spring into the installation hole of the timing belt case.

Using a 12 mm hexagon wrench, install a new gasket and the plug.

Torque:

37 N*m{375 kgf*cm, 27 ft.*lbf}