Accelerator Pedal On-Vehicle Inspection


  1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

Accelerator Pedal -- On-Vehicle Inspection



1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

  1. Connect the GTS to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the GTS on.

  1. Enter the following menus: Powertrain / Engine and ECT / Data List / Accel Sensor Out No. 1, Accel Sensor Out No. 2.

  1. When depressing or releasing the accelerator pedal, check that the values of Accel Sensor Out No. 1 and Accel Sensor Out No. 2 are within the specification.

    Standard Voltage:
    Item
    		Condition
    		Specified Condition
    Accel Sensor Out No. 1
    		Released
    		0.5 to 1.1 V
    Depressed
    		2.6 to 4.5 V
    Accel Sensor Out No. 2
    		Released
    		1.2 to 2.0 V
    Depressed
    		3.4 to 4.75 V
    If the result is not as specified, check the accelerator pedal sensor assembly, wire harness and ECM.