Valve Body Assembly Installation

Install the spring and check ball body.

Insert the pin of the manual valve into the hole of the manual valve lever.

Install the transmission valve body with the 19 bolts.

Torque:

11 N*m{112 kgf*cm, 8 ft.*lbf}

HINT:

Each bolt length is indicated below.

Install the detent spring and detent spring cover with the bolt.

Torque:

10 N*m{102 kgf*cm, 7 ft.*lbf}

Connect the 7 connectors to the solenoid valves.

Connect the 2 ATF temperature sensors with the 2 clamps and 2 bolts.

Torque:

for bolt A:

10 N*m{102 kgf*cm, 7 ft.*lbf}

for bolt B:

11 N*m{112 kgf*cm, 8 ft.*lbf}

HINT:

Each bolt length is indicated below.

12 mm (0.472 in.) for bolt A

Coat a new O-ring with ATF and install it to the oil strainer.

Install the oil strainer with the 4 bolts.

Torque:

10 N*m{102 kgf*cm, 7 ft.*lbf}

Install a new gasket and the oil pan with the 20 bolts.

Torque:

7.0 N*m{71 kgf*cm, 62 in.*lbf}

Install the rear engine mounting insulator to the transmission with the 4 bolts.

Torque:

65 N*m{663 kgf*cm, 48 ft.*lbf}

Install the frame crossmember to the engine mounting insulator with the 4 set bolts.

Torque:

30 N*m{306 kgf*cm, 22 ft.*lbf}

Connect the ends of the frame crossmember to the vehicle with the 4 bolts and 4 nuts.

Torque:

72 N*m{734 kgf*cm, 53 ft.*lbf}

Install the front suspension member bracket LH and front suspension member bracket RH with the 8 bolts.

Torque:

33 N*m{337 kgf*cm, 24 ft.*lbf}

Add automatic transmission fluid (LandCruiser RM000002BL004TX.html).