DTC No.
| Detection Item
| Fail-safe Operation
| Fail-safe Deactivation Condition
|
P0031
| Oxygen (A/F) Sensor Heater Control Circuit Low (Bank 1 Sensor 1)
| The power to the air fuel ratio sensor and air fuel ratio sensor heater is stopped.
| Pass condition detected
|
P0032
| Oxygen (A/F) Sensor Heater Control Circuit High (Bank 1 Sensor 1)
| The power to the air fuel ratio sensor and air fuel ratio sensor heater is stopped.
| Pass condition detected
|
P0046
| Turbocharger / Supercharger Boost Control Solenoid Circuit Range / Performance
| The engine power is limited.
| Engine switch off
|
P0047
| Turbocharger/ Supercharger Boost Control "A" Circuit Low
| The engine power is limited.
| Engine switch off
|
P0048
| Turbocharger/ Supercharger Boost Control "A" Circuit High
| The engine power is limited.
| Engine switch off
|
P007C
| Charge Air Cooler Temperature Sensor Circuit Low
| The intake air temperature is fixed at a specified value.
| Pass condition detected
|
P007D
| Charge Air Cooler Temperature Sensor Circuit High
| The intake air temperature is fixed at a specified value.
| Pass condition detected
|
P0087
| Fuel Rail/System Pressure - Too Low
| The engine power is reduced by 90%.*
| Engine switch off
|
P0088
| Fuel Rail/System Pressure - Too High
| The engine power is reduced by 90%.*
| Engine switch off
|
P0093
| Fuel System Leak Detected - Large Leak
| - The engine power is limited.
- PM forced regeneration is prohibited.
| Pass condition detected
|
P00BB
| Fuel Injector Insufficient Flow - Forced Limited Power
| The engine power is limited.
| Pass condition detected
|
P0100
| Mass Air Flow Circuit Malfunction
| The engine power is limited.
| Pass condition detected
|
P0101
| Mass or Volume Air Flow Circuit
| The engine power is limited.
| Engine switch off
|
P0107
| Manifold Absolute Pressure/Barometric Pressure Circuit Low Input
| The turbo pressure is fixed at a specified value.
| Pass condition detected
|
P0108
| Manifold Absolute Pressure/Barometric Pressure Circuit High Input
| The turbo pressure is fixed at a specified value.
| Pass condition detected
|
P0112
| Intake Air Temperature Circuit Low Input
| The intake air temperature value is fixed.
| Pass condition detected
|
P0113
| Intake Air Temperature Circuit High Input
| The intake air temperature value is fixed.
| Pass condition detected
|
P0115
| Engine Coolant Temperature Circuit
| The engine coolant temperature sensor output is fixed at a specified value (the fixed value varies depending on conditions).
| Pass condition detected
|
P0117
| Engine Coolant Temperature Circuit Low Input
| The engine coolant temperature sensor output is fixed at a specified value (the fixed value varies depending on conditions).
| Pass condition detected
|
P0118
| Engine Coolant Temperature Circuit High Input
| The engine coolant temperature sensor output is fixed at a specified value (the fixed value varies depending on conditions).
| Pass condition detected
|
P0122
| Throttle/Pedal Position Sensor/Switch "A" Circuit Low Input
| The engine power is limited.
| Engine switch off
|
P0123
| Throttle/Pedal Position Sensor/Switch "A" Circuit High Input
| The engine power is limited.
| Engine switch off
|
P0190
| Fuel Rail Pressure Sensor Circuit
| - The main and sub circuits of the fuel pressure sensor are malfunctioning:
- The engine power is reduced by 90%.*
- The main or sub circuit of the fuel pressure sensor is malfunctioning:
- The engine power is limited.
| Engine switch off
|
P0191
| Fuel Rail Pressure Sensor Circuit Range / Performance
| - The main and sub circuits of the fuel pressure sensor are malfunctioning:
- The engine power is reduced by 90%.*
- The main or sub circuit of the fuel pressure sensor is malfunctioning:
- The engine power is limited.
| Engine switch off
|
P0192
| Fuel Rail Pressure Sensor Circuit Low Input
| - The main and sub circuits of the fuel pressure sensor are malfunctioning:
- The engine power is reduced by 90%.*
- The main or sub circuit of the fuel pressure sensor is malfunctioning:
- The engine power is limited.
| Engine switch off
|
P0193
| Fuel Rail Pressure Sensor Circuit High Input
| - The main and sub circuits of the fuel pressure sensor are malfunctioning:
- The engine power is reduced by 90%.*
- The main or sub circuit of the fuel pressure sensor is malfunctioning:
- The engine power is limited.
| Engine switch off
|
P0201
| Injector Circuit / Open - (Cylinder 1)
| The engine power is limited.
| Engine switch off to on (IG) or STA on
|
P0202
| Injector Circuit / Open - (Cylinder 2)
| The engine power is limited.
| Engine switch off to on (IG) or STA on
|
P0203
| Injector Circuit / Open - (Cylinder 3)
| The engine power is limited.
| Engine switch off to on (IG) or STA on
|
P0204
| Injector Circuit / Open - (Cylinder 4)
| The engine power is limited.
| Engine switch off to on (IG) or STA on
|
P0299
| Turbocharger / Supercharger Underboost
| The engine power is limited.
| Pass condition detected
|
P0335
| Crankshaft Position Sensor "A" Circuit
| The engine power is limited.
| Pass condition detected
|
P0337
| Crankshaft Position Sensor "A" Circuit Low Input
| The engine power is limited.
| Pass condition detected
|
P0338
| Crankshaft Position Sensor "A" Circuit High Input
| The engine power is limited.
| Pass condition detected
|
P0339
| Crankshaft Position Sensor "A" Circuit Intermittent
| The engine power is limited.
| Pass condition detected
|
P0340
| Camshaft Position Sensor "A" Circuit (Bank 1 or Single Sensor)
| The engine power is limited.
| Pass condition detected
|
P0342
| Camshaft Position Sensor "A" Circuit Low Input (Bank 1 or Single Sensor)
| The engine power is limited.
| Pass condition detected
|
P0343
| Camshaft Position Sensor "A" Circuit High Input (Bank 1 or Single Sensor)
| The engine power is limited.
| Pass condition detected
|
P0400
| Exhaust Gas Recirculation Flow
| The engine power is limited.
| Engine switch off
|
P0405
| Exhaust Gas Recirculation Sensor "A" Circuit Low
| The engine power is limited.
| Engine switch off
|
P0406
| Exhaust Gas Recirculation Sensor "A" Circuit High
| The engine power is limited.
| Engine switch off
|
P0420
| Catalyst System Efficiency Below Threshold (Bank 1)
| PM forced regeneration is prohibited.
| Pass condition detected
|
P042E
| Exhaust Gas Recirculation "A" Control Stuck Open
| The engine power is limited.
| Engine switch off
|
P0488
| Exhaust Gas Recirculation Throttle Position Control Range/Performance
| The engine power is limited.
| Engine switch off
|
P0489
| Exhaust Gas Recirculation Control Circuit Low
| The engine power is limited.
| Engine switch off
|
P0490
| Exhaust Gas Recirculation Control Circuit High
| The engine power is limited.
| Engine switch off
|
P0500
| Vehicle Speed Sensor "A"
| The vehicle speed is fixed at 0 km/h (0 mph).
| Pass condition detected
|
P0545
| Exhaust Gas Temperature Sensor Circuit Low (Bank 1 Sensor 1)
| PM forced regeneration is prohibited.
| Pass condition detected
|
P0546
| Exhaust Gas Temperature Sensor Circuit High (Bank 1 Sensor 1)
| PM forced regeneration is prohibited.
| Pass condition detected
|
P0606
| ECM / PCM Processor
| The engine is stalled.
| Pass condition detected
|
P060A
| Internal Control Module Monitoring Processor Performance
| The engine is stalled.
| Pass condition detected
|
P060B
| Internal Control Module A/D Processing Performance
| The engine power is limited.
| Pass condition detected
|
P060D
| Internal Control Module Accelerator Pedal Position Performance
| The engine power is limited.
| Pass condition detected
|
P0627
| Fuel Pump Control Circuit / Open
| The engine power is limited.
| Pass condition detected
|
P062D
| No. 1 Fuel Injector Driver Circuit Performance
| The engine power is limited.
| Engine switch off
|
P1229
| Fuel Pump System
| The engine power is limited.
| Engine switch off
|
P1251
| Turbocharger / Supercharger Overboost Condition (Too High)
| The engine power is limited.
| Engine switch off
|
P1271
| Fuel Regulator Circuit Malfunction (EDU Drive)
| The engine power is limited.
| Engine switch off
|
P1272
| Fuel Pressure Regulator Malfunction
| The engine power is limited.
| Engine switch off
|
P1626
| Idle Signal Output Value Too Low
| The engine power is limited.
| Engine switch off
|
P1627
| Idle Signal Output Value Too High
| The engine power is limited.
| Engine switch off
|
P2006
| Intake Manifold Runner Control Stuck Closed (Bank 1)
| The engine power is limited.
| Engine switch off
|
P200C
| Diesel Particulate Filter Over Temperature Bank 1
| PM forced regeneration is prohibited.
| Engine switch off
|
P200E
| Catalyst System Temperature Too High Bank 1
| PM forced regeneration is prohibited.
| Engine switch off
|
P2032
| Exhaust Gas Temperature Sensor Circuit Low (Bank 1 Sensor 2)
| PM forced regeneration is prohibited.
| Pass condition detected
|
P2033
| Exhaust Gas Temperature Sensor Circuit High (Bank 1 Sensor 2)
| PM forced regeneration is prohibited.
| Pass condition detected
|
P2084
| Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 2
| PM forced regeneration is prohibited.
| Pass condition detected
|
P20CD
| Open in Exhaust Aftertreatment Fuel Injector "A" Control Circuit
| - The engine power is reduced by 90%.*
- PM forced regeneration is prohibited.
| Pass condition detected
|
P20CF
| Exhaust Aftertreatment Fuel Injector "A" Stuck Open
| PM forced regeneration is prohibited.
| Engine switch off
|
P20CF
| Exhaust Aftertreatment Fuel Injector "A" Stuck Open
| The engine power is reduced by 90%.*
| Pass condition detected
|
P2120
| Throttle/Pedal Position Sensor/Switch "D" Circuit
| The engine power is limited.
| Engine switch off
|
P2121
| Throttle/Pedal Position Sensor/Switch "D" Circuit Range/Performance
| The engine power is limited.
| Engine switch off
|
P2122
| Throttle/Pedal Position Sensor/Switch "D" Circuit Low Input
| The engine power is limited.
| Engine switch off
|
P2123
| Throttle/Pedal Position Sensor/Switch "D" Circuit High Input
| The engine power is limited.
| Engine switch off
|
P2125
| Throttle/Pedal Position Sensor/Switch "E" Circuit
| The engine power is limited.
| Engine switch off
|
P2127
| Throttle/Pedal Position Sensor/Switch "E" Circuit Low Input
| The engine power is limited.
| Engine switch off
|
P2128
| Throttle/Pedal Position Sensor/Switch "E" Circuit High Input
| The engine power is limited.
| Engine switch off
|
P2138
| Throttle/Pedal Position Sensor/Switch "D"/"E" Voltage Correlation
| The engine power is limited.
| Engine switch off
|
P2195
| Oxygen (A/F) Sensor Signal Stuck Lean (Bank 1 Sensor 1)
| The power to the air fuel ratio sensor and air fuel ratio sensor heater is stopped.
| Pass condition detected
|
P2226
| Barometric Pressure Circuit
| The atmospheric pressure is fixed at a specified value.
| Pass condition detected
|
P2228
| Barometric Pressure Circuit Low Input
| The atmospheric pressure is fixed at a specified value.
| Pass condition detected
|
P2229
| Barometric Pressure Circuit High Input
| The atmospheric pressure is fixed at a specified value.
| Pass condition detected
|
P2237
| Oxygen (A/F) Sensor Pumping Current Circuit / Open (Bank 1 Sensor 1)
| The power to the air fuel ratio sensor and air fuel ratio sensor heater is stopped.
| Pass condition detected
|
P2238
| Oxygen (A/F) Sensor Pumping Current Circuit Low (Bank 1 Sensor 1)
| The power to the air fuel ratio sensor and air fuel ratio sensor heater is stopped.
| Pass condition detected
|
P2239
| Oxygen (A/F) Sensor Pumping Current Circuit High (Bank 1 Sensor 1)
| The power to the air fuel ratio sensor and air fuel ratio sensor heater is stopped.
| Pass condition detected
|
P2252
| Oxygen (A/F) Sensor Reference Ground Circuit Low (Bank 1 Sensor 1)
| The power to the air fuel ratio sensor and air fuel ratio sensor heater is stopped.
| Pass condition detected
|
P2253
| Oxygen (A/F) Sensor Reference Ground Circuit High (Bank 1 Sensor 1)
| The power to the air fuel ratio sensor and air fuel ratio sensor heater is stopped.
| Pass condition detected
|
P242B
| Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 3
| PM forced regeneration is prohibited.
| Pass condition detected
|
P242C
| Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 3
| PM forced regeneration is prohibited.
| Pass condition detected
|
P242D
| Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 3
| PM forced regeneration is prohibited.
| Pass condition detected
|
P244A
| Diesel Particulate Filter Differential Pressure Too Low
| PM forced regeneration is prohibited.
| Engine switch off
|
P244B
| Diesel Particulate Filter Differential Pressure Too High
| - The engine power is limited.
- PM forced regeneration is prohibited.
| Engine switch off
|
P2458
| Diesel Particulate Filter Regeneration Duration
| PM forced regeneration is prohibited.
| Engine switch off
|
P2463
| Diesel Particulate Filter Restriction - Soot Accumulation
| - The engine power is limited.
- PM forced regeneration is prohibited.
| Pass condition detected
|
P2564
| Turbocharger/ Supercharger Boost Control Position Sensor "A" Circuit Low
| The engine power is limited.
| Engine switch off
|
P2565
| Turbocharger/ Supercharger Boost Control Position Sensor "A" Circuit High
| The engine power is limited.
| Engine switch off
|