Front Crankshaft Oil Seal Installation

Apply MP grease to the lip of a new crankshaft oil seal.

NOTICE:

1. Keep the lip free of foreign objects.
   
2. Do not allow MP grease to contact the dust seal.
   

Using SST and a hammer, tap in the front crankshaft oil seal.

SST

09214-76011

NOTICE:

1. The acceptable depth from the top of the timing chain cover assembly is 0 to 1.5 mm (0 to 0.0591 in.)
   
2. Keep the lip free from foreign matter.
   
3. Do not tap the front crankshaft oil seal at an angle.
   
4. Make sure that the front crankshaft oil seal is properly installed.
   

Align the keyway of the crankshaft pulley with the key located on the crankshaft, and then slide the crankshaft pulley into place to install it.

Using SST, install a new pulley bolt.

SST

09213-58014(91551-80840)
09330-00021

Torque:

365 N*m{3722 kgf*cm, 269 ft.*lbf}

w/ Viscous Heater:
Install the crankshaft pulley cover to the crankshaft pulley.

w/o Viscous Heater:
Install the crankshaft pulley cover to the crankshaft pulley with the 4 bolts.

Torque:

21 N*m{214 kgf*cm, 15 ft.*lbf}

Install the viscous heater crankshaft pulley to the crankshaft pulley with the 4 bolts.

Torque:

25 N*m{250 kgf*cm, 18 ft.*lbf}