Door Control Transmitter (W/O Entry And Start System) Installation


  1. INSTALL TRANSMITTER BATTERY (except Separate Type)

  2. INSTALL DOOR CONTROL TRANSMITTER MODULE (except Separate Type)

  3. INSTALL TRANSMITTER HOUSING COVER (except Separate Type)

  4. INSTALL TRANSMITTER BATTERY (for Separate Type)

Door Control Transmitter (W/O Entry And Start System) -- Installation


NOTICE:
Take extra care when handling these precision electronic components.


1. INSTALL TRANSMITTER BATTERY (except Separate Type)
NOTICE:
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Install the battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

    NOTICE:
    1. Be careful not to bend the transmitter battery electrode during insertion.
    2. Keep the transmitter cover interior free of dust and oil.

  1. Install the cover.



2. INSTALL DOOR CONTROL TRANSMITTER MODULE (except Separate Type)

  1. Install the door control transmitter module.



3. INSTALL TRANSMITTER HOUSING COVER (except Separate Type)

  1. Install the transmitter housing cover to the transmitter housing case.

  1. Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.



4. INSTALL TRANSMITTER BATTERY (for Separate Type)
NOTICE:
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Install a new battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

    NOTICE:
    1. Do not bend the transmitter battery electrode during insertion.
    2. Keep the transmitter cover interior free of dust and oil.

  1. Install the transmitter housing cover.

  1. Press one of the transmitter switches and check that the LED illuminates.