Tire Pressure Warning System Dtc Check / Clear

  1. CHECK DTC (USING GTS)

  1. CHECK DTC (USING SST CHECK WIRE)

  1. CLEAR DTC

Tire Pressure Warning System -- Dtc Check / Clear



CHECK DTC (USING GTS)

  1. Turn the ignition switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the ignition switch ON.

  4. Turn the GTS on.

  5. Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.

  6. Read the DTCs.


CHECK DTC (USING SST CHECK WIRE)
Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Tire Pressure Monitoring.Tire Pressure Warning System.Tire Pressure Warning System Dtc Check / Clear

  1. Turn the ignition switch off.

  2. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

    SST
    09843-18040

  3. Turn the ignition switch ON.

  4. Read and record any DTCs from the tire pressure warning light on the combination meter. Refer to the illustration for examples of a normal system code and codes 13 and 33.

    HINT:
    1. If the tire pressure warning light does not indicate any DTCs or the normal system code, inspect the tire pressure warning light circuit or TC and CG terminal circuit.
      Trouble Area
      		See page
      Tire pressure warning light circuit
      		LandCruiser RM000000XN309TX.html
      TC and CG terminal circuit
      		LandCruiser RM0000018LX04BX.html
    2. If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is displayed first.
    Text in Illustration
    *1
    		DLC3
    *2
    		Tire Pressure Warning Light
    *a
    		Normal System Code
    *b
    		ON
    *c
    		OFF
    *d
    		0.25 sec.
    *e
    		Code 13 and 33
    *f
    		0.5 sec.
    *g
    		2.5 sec.
    *h
    		1.5 sec.
    *i
    		4.5 sec.
    *j
    		Repeat

  5. Refer to the Diagnostic Trouble Code Chart (LandCruiser RM000000XMR0B7X.html) for DTC information.

  6. After completing the check, turn the ignition switch off and remove SST from the DLC3.


CLEAR DTC
HINT:
After repairing the malfunctions, clear the DTCs.

  1. Turn the ignition switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the ignition switch ON.

  4. Turn the GTS on.

  5. Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.

  6. Clear DTCs following the prompts on the GTS screen.

    HINT:
    Refer to the GTS operator's manual for further details.