Dtc P2759 Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical (Shift Solenoid Valve Slu)


DESCRIPTION

MONITOR DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

INSPECT TRANSMISSION WIRE (SHIFT SOLENOID VALVE SLU)

CHECK HARNESS AND CONNECTOR (TRANSMISSION WIRE - ECM)

INSPECT SHIFT SOLENOID VALVE SLU

DTC P2759 Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical (Shift Solenoid Valve SLU)


DESCRIPTION

Refer to the system description for DTC P2757 (LandCruiser RM000000W8D0JMX_01.html).

DTC No.
DTC Detection Condition
Trouble Area
P2759
Open or short is detected in shift solenoid valve SLU circuit for 1 second or more while driving (1 trip detection logic).
  1. Open or short in shift solenoid valve SLU circuit
  2. Shift solenoid valve SLU
  3. ECM

MONITOR DESCRIPTION

When an open or short in a shift solenoid valve SLU circuit is detected, the ECM determines there is a malfunction. The ECM will illuminate the MIL and store this DTC.

WIRING DIAGRAM


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Ac60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Gr-Fe). Dtc P2759 Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical (Shift Solenoid Valve Slu)


INSPECTION PROCEDURE

NOTICE:
Perform registration and/or initialization when parts related to the automatic transmission are replaced (LandCruiser RM000000O7H0HSX.html).
HINT:
After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.
  1. Perform the Lock-up Function in Road Test (LandCruiser RM000000W790SGX.html).
  2. Check for DTCs again (LandCruiser RM000000W7711KX.html).
1.INSPECT TRANSMISSION WIRE (SHIFT SOLENOID VALVE SLU)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Ac60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Gr-Fe). Dtc P2759 Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical (Shift Solenoid Valve Slu)

  1. Disconnect the transmission wire connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    21 (SLU+) - 22 (SLU-)
    		20°C (68°F)
    		5.0 to 5.6 Ω
    21 (SLU+) - Body ground
    		Always
    		10 kΩ or higher
    22 (SLU-) - Body ground
    		Always
    		10 kΩ or higher
    Text in Illustration
    *a
    		Component without harness connected
    (Transmission Wire)


NG
Go to step 3
OK


2.CHECK HARNESS AND CONNECTOR (TRANSMISSION WIRE - ECM)


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Ac60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Gr-Fe). Dtc P2759 Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical (Shift Solenoid Valve Slu)

  1. Disconnect the ECM connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    C150-8 (SLU+) - C150-9 (SLU-)
    		20°C (68°F)
    		5.0 to 5.6 Ω
    C150-8 (SLU+) - Body ground
    		Always
    		10 kΩ or higher
    C150-9 (SLU-) - Body ground
    		Always
    		10 kΩ or higher
    Text in Illustration
    *a
    		Rear view of wire harness connector
    (to ECM)


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

REPLACE ECM (LandCruiser RM0000013Z002DX.html)

3.INSPECT SHIFT SOLENOID VALVE SLU


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Ac60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Gr-Fe). Dtc P2759 Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical (Shift Solenoid Valve Slu)

  1. Remove shift solenoid valve SLU (LandCruiser RM000000O9L07IX.html).

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		5.0 to 5.6 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    1. Battery positive (+) with a 21 W bulb → Terminal 1
    2. Battery negative (-) → Terminal 2
    		Valve moves and makes an operating noise
Text in Illustration
*1
Shift Solenoid Valve SLU


NG
REPLACE SHIFT SOLENOID VALVE SLU (LandCruiser RM000000O9L07IX.html)
OK

REPLACE TRANSMISSION WIRE (LandCruiser RM000000ODV01OX.html)