Outer Rear View Mirror -- Installation |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH |
Attach the claw to install the outer rear view mirror, and then install the 3 nuts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
Connect the connector.
| 2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH |
Install the front door inner glass weatherstrip.
 |
| 3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
Connect the front door lock remote control cable assembly and front door inside locking cable assembly.
 |
Connect 2 connectors.
w/ Seat Position Memory System:
Connect the connectors.
Attach the front door trim board sub-assembly by attaching the 4 claws of the front door inner glass weatherstrip as shown in the illustration.
 |
Attach the 12 clips and front door trim board retainer to install the front door trim board sub-assembly.
 |
Install the 3 screws.
| 4. INSTALL ASSIST GRIP COVER LH |
Attach the 8 claws to install the assist grip cover.
 |
| 5. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH |
Attach the 3 claws to install the inside handle bezel.
 |
| 6. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH |
Attach the 2 claws to install the front door lower frame bracket garnish.
| 7. ADJUST SIDE TELEVISION CAMERA ASSEMBLY |
Adjust the side camera (LandCruiser RM000003XM401ZX.html).