Speed Sensor -- Inspection |
| 1. INSPECT TRANSMISSION REVOLUTION SENSOR (NT) |
Connect the battery to the transmission revolution sensor (NT) as shown in the illustration.
Text in Illustration *1 Transmission Revolution Sensor (NT) *2 Battery *a Component without harness connected
(Transmission Revolution Sensor (NT))*b Ammeter *c Magnet *d 5 mm (0.197 in.) or less
Wave a magnetic object left and right in front of the transmission revolution sensor (NT) tip (5 mm (0.197 in.) or less) to change the high/low signals while measuring the current.
- NOTICE:
- Make sure to wave the magnetic object during the inspection. The current will not change without waving the magnetic object as indicated by the arrow in the illustration.
Measure the current according to the value(s) in the table below.
- Standard Current:
Tester Connection Condition Specified Condition 1 (NTO) - 2 (NTB) Low signal 4 to 8 mA High signal 12 to 16 mA
| 2. INSPECT TRANSMISSION REVOLUTION SENSOR (SP2) |
Connect the battery to the transmission revolution sensor (SP2) as shown in the illustration.
Text in Illustration *1 Transmission Revolution Sensor (SP2) *2 Battery *a Component without harness connected
(Transmission Revolution Sensor (SP2))*b Ammeter *c Magnet *d 5 mm (0.197 in.) or less
Wave a magnetic object left and right in front of the transmission revolution sensor (SP2) tip (5 mm (0.197 in.) or less) to change the high/low signals while measuring the current.
- NOTICE:
- Make sure to wave the magnetic object during the inspection. The current will not change without waving the magnetic object as indicated by the arrow in the illustration.
Measure the current according to the value(s) in the table below.
- Standard Current:
Tester Connection Condition Specified Condition 1 (SP2O) - 2 (SP2B) Low signal 4 to 8 mA High signal 12 to 16 mA