Audio And Visual System (For Radio And Display Type) Voice Is Not Recognized
INSPECTION PROCEDURE
CHECK CONDITION
CHECK MICROPHONE (OPERATION CHECK)
AUDIO AND VISUAL SYSTEM (for Radio and Display Type) - Voice is not Recognized |
INSPECTION PROCEDURE
- HINT:
- When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
Refer to the owner's manual and follow its instructions to check that the voice recognition level of the system is not too low for a particular voice.
ResultResult
| Proceed to
|
System voice recognition level is low with any voice.
| A
|
System voice recognition level is low only for a particular voice.
| B
|
- HINT:
- System voice recognition level varies depending on voice and pronunciation. This is not a malfunction.
2.CHECK MICROPHONE (OPERATION CHECK) |
Enter the "Microphone Check" screen. [Refer to Check Mic & Voice Recognition in Operation Check (LandCruiser RM000005LZX005X.html)]
When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
Select the recording switch and perform voice recording.
- Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.
- Voice can be recorded up to 5 seconds.
Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
- OK:
- All check results are normal.