Transmission Wire Removal


  1. DRAIN AUTOMATIC TRANSMISSION FLUID

  2. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

  3. DISCONNECT TRANSMISSION WIRE

  4. REMOVE TRANSMISSION INSULATOR RH

  5. REMOVE TRANSMISSION WIRE

Transmission Wire -- Removal



1. DRAIN AUTOMATIC TRANSMISSION FLUID


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the drain plug and gasket from the automatic transmission assembly and drain the ATF.

  1. Install a new gasket and the drain plug to the automatic transmission assembly.

    Torque:
    20 N*m{204 kgf*cm, 15 ft.*lbf}


2. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 10 bolts, automatic transmission oil pan sub-assembly and automatic transmission oil pan gasket from the automatic transmission case sub-assembly.

    NOTICE:
    Some fluid will remain in the automatic transmission oil pan sub-assembly. Remove all of the bolts, and carefully remove the automatic transmission oil pan sub-assembly.

  1. Remove the 4 transmission oil cleaner magnets from the automatic transmission oil pan sub-assembly.

  1. Examine the particles in the automatic transmission oil pan sub-assembly.

    1. Collect any steel chips with the removed transmission oil cleaner magnets. Carefully inspect the foreign matter and particles in the automatic transmission oil pan sub-assembly and on the transmission oil cleaner magnets to anticipate the type of wear you will find in the automatic transmission assembly.
      Steel (magnetic): bearing, gear and clutch plate wear
      Brass (non-magnetic): bush wear



3. DISCONNECT TRANSMISSION WIRE


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Ac60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Gr-Fe).Transmission Wire Removal

  1. Remove the 2 bolts and the 2 temperature sensor clamps, and disconnect the 2 temperature sensors.

    Text in Illustration
    *1
    		Temperature Sensor Clamp
    *2
    		Temperature Sensor

  1. Disconnect the 7 solenoid valve connectors and transmission wire from the transmission valve body assembly.



4. REMOVE TRANSMISSION INSULATOR RH


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. w/ ATF Warmer:
    Remove the bolt and wire harness clamp bracket from the transmission insulator RH.

    1. Remove the 2 bolts and transmission insulator RH from the automatic transmission assembly.



  1. w/o ATF Warmer:



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

    1. Remove the 3 bolts and transmission insulator RH from the automatic transmission assembly.



5. REMOVE TRANSMISSION WIRE


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Disconnect the transmission wire connector.

    HINT:
    Detach the claw, press down the lever, and disconnect the transmission wire connector.

  1. Remove the bolt and pull out the transmission wire from the automatic transmission case sub-assembly.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the O-ring from the connector of transmission wire.



    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Remove the 2 O-rings from the 2 temperature sensors.