Valve Body Assembly Inspection


  1. INSPECT SHIFT SOLENOID VALVE SL1

  2. INSPECT SHIFT SOLENOID VALVE SL2

  3. INSPECT SHIFT SOLENOID VALVE SL3

  4. INSPECT SHIFT SOLENOID VALVE SL4

  5. INSPECT SHIFT SOLENOID VALVE SLU

  6. INSPECT SHIFT SOLENOID VALVE SLT

  7. INSPECT SHIFT SOLENOID VALVE SL

Valve Body Assembly -- Inspection



1. INSPECT SHIFT SOLENOID VALVE SL1


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Ac60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Gr-Fe).Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		5.0 to 5.6 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Shift Solenoid Valve SL1)
    If the value is not as specified, replace the shift solenoid valve SL1.

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    1. Battery positive (+) with a 21 W bulb → Terminal 1
    2. Battery negative (-) → Terminal 2
    		Valve moves and makes an operating noise
    If the operation cannot be done as specified, replace the shift solenoid valve SL1.


2. INSPECT SHIFT SOLENOID VALVE SL2
HINT:
Refer to Inspect Shift Solenoid Valve SL1.


3. INSPECT SHIFT SOLENOID VALVE SL3
HINT:
Refer to Inspect Shift Solenoid Valve SL1.


4. INSPECT SHIFT SOLENOID VALVE SL4
HINT:
Refer to Inspect Shift Solenoid Valve SL1.


5. INSPECT SHIFT SOLENOID VALVE SLU
HINT:
Refer to Inspect Shift Solenoid Valve SL1.


6. INSPECT SHIFT SOLENOID VALVE SLT
HINT:
Refer to Inspect Shift Solenoid Valve SL1.


7. INSPECT SHIFT SOLENOID VALVE SL


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Ac60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Gr-Fe).Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    Shift solenoid valve SL connector terminal - Shift solenoid valve SL body
    		20°C (68°F)
    		11 to 15 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Shift Solenoid Valve SL)
    If the value is not as specified, replace the shift solenoid valve SL.

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    1. Battery positive (+) → Shift solenoid valve SL connector
    2. Battery negative (-) → Shift solenoid valve SL body
    		Valve moves and makes an operating noise