DTC B1610/13 Front Airbag Sensor RH Malfunction |
DESCRIPTION
The front airbag sensor RH consists of the diagnostic circuit and frontal deceleration sensor, etc.If the center airbag sensor receives signals from the frontal deceleration sensor, it determines whether the SRS should be activated.
DTC B1610/13 is stored when a malfunction is detected in the front airbag sensor RH circuit.
| DTC Code | DTC Detection Condition | Trouble Area |
| B1610/13 | Either condition is met:
|
|
WIRING DIAGRAM
INSPECTION PROCEDURE
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (LandCruiser RM000003YMD00TX.html).
- When disconnecting the cable from the negative (-) battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).
| 1.CHECK FRONT AIRBAG SENSOR RH |
 |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.
Interchange the front airbag sensor LH with RH and connect the connectors to them.
Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Clear the DTCs stored in memory (LandCruiser RM000000XFE0NGX.html).
Turn the ignition switch off.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Check for DTCs (LandCruiser RM000000XFE0NGX.html).
Result Result Proceed to DTC B1610 is output A DTC B1615 is output B DTC B1610 and B1615 are not output C - HINT:
- Codes other than DTC B1610 and B1615 may be output at this time, but they are not related to this check.
Text in Illustration *1 Front Airbag Sensor LH *2 Center Airbag Sensor
|
| ||||
|
| ||||
| C | ||
| ||