Input Shaft Inspection

Drivetrain. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
R150 R151 R156 Manual Transmission Transaxle. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSPECT NO. 2 SYNCHRONIZER RING

Input Shaft -- Inspection



1. INSPECT NO. 2 SYNCHRONIZER RING


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.R150 R151 R156 Manual Transmission Transaxle.Manual Transmission System.Input Shaft Inspection

  1. Apply gear oil to the cone of the input shaft, and check that it does not turn in either direction while pushing the No. 2 synchronizer ring.

    Text in Illustration
    *a
    		Locks
    If it can turn, replace the No. 2 synchronizer ring.


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.R150 R151 R156 Manual Transmission Transaxle.Manual Transmission System.Input Shaft Inspection

  1. Push the No. 2 synchronizer ring against the cone of the input shaft. Measure the clearance between the No. 2 synchronizer ring and input shaft.

    Standard clearance:
    0.70 to 1.70 mm (0.0276 to 0.0669 in.)
    If the clearance is not as specified, replace the No. 2 synchronizer ring with a new one.