Vehicle Exterior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Door Hatch. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Hood Lock Control Cable Assembly -- Removal |
1. REMOVE RADIATOR GRILLE |
Put protective tape around the radiator grille.
Text in Illustration *1 Protective Tape
![]() |
Remove the 2 clips and 2 screws.
Detach the 6 claws and remove the radiator grille.
![]() |
2. REMOVE HOOD LOCK ASSEMBLY |
Remove the 3 bolts.
![]() |
Disconnect the hood lock control cable and remove the hood lock.
![]() |
3. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
Detach the 3 claws.
![]() |
Disconnect the hood lock control cable and remove the hood lock control lever.
4. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY |
Tie a string to the end of the hood lock control cable assembly as shown in the illustration.
- HINT:
- Use a length of string long enough to pass through the engine compartment.
Text in Illustration *1 String
![]() |
Detach each clamp and the grommet, and then pull out the hood lock control cable from the vehicle body.
Untie the string from the hood lock control cable.
Text in Illustration *1 Hood Lock Control Cable *2 Grommet