Dtc B1573 Short In Telephone Antenna Circuit
DESCRIPTION
INSPECTION PROCEDURE
CHECK CONNECTION OF CONNECTOR
CLEAR DTC
CHECK FOR DTC
CHECK CONNECTOR CONDITION
CHECK INSTRUMENT PANEL INTEGRATION ANTENNA ASSEMBLY (TELEPHONE ANTENNA)
CLEAR DTC
CHECK FOR DTC
REPLACE INSTRUMENT PANEL INTEGRATION ANTENNA ASSEMBLY
CLEAR DTC
CHECK FOR DTC
DTC B1573 Short in Telephone Antenna Circuit |
DTC B15CB Telematics Transceiver Antenna Disconnected |
DESCRIPTION
These DTCs are stored when a malfunction occurs in the instrument panel integration antenna assembly (telephone antenna) circuit.DTC Code
| DTC Detection Condition
| Trouble Area
|
B1573
| There is a short circuit in the telephone antenna between the telephone transceiver assembly and instrument panel integration antenna assembly, or at the points where it connects to the telephone transceiver assembly and instrument panel integration antenna assembly.
| - Telephone transceiver assembly
- Instrument panel integration antenna assembly (telephone antenna)
|
B15CB
| There is an open circuit in the telephone antenna between the telephone transceiver assembly and instrument panel integration antenna assembly, or at the points where it connects to the telephone transceiver assembly and instrument panel integration antenna assembly.
|
INSPECTION PROCEDURE
- NOTICE:
- When replacing the telephone transceiver assembly or instrument panel integration antenna assembly, refer to the Service Bulletin.
- When the telephone transceiver assembly is replaced, it is necessary to set the contract mode.
1.CHECK CONNECTION OF CONNECTOR |
Turn the ignition switch off.
Check that the connectors are properly connected to the telephone transceiver assembly and instrument panel integration antenna assembly (telephone antenna connector).
- OK:
- Connectors are properly connected.
| CONNECT CONNECTOR CORRECTLY |
|
|
Clear the DTCs (HILUX_TGN26 RM0000044SM00EX.html).
Check for DTCs (HILUX_TGN26 RM0000044SM00EX.html).
- OK:
- DTC B1573 or B15CB is not output.
4.CHECK CONNECTOR CONDITION |
Disconnect the instrument panel integration antenna assembly (telephone antenna) connector [color: wine red].
Check that the connector pins are not bent.
- OK:
- Connector pins are not bent.
| REPAIR OR REPLACE NAVIGATION ANTENNA ASSEMBLY |
|
|
5.CHECK INSTRUMENT PANEL INTEGRATION ANTENNA ASSEMBLY (TELEPHONE ANTENNA) |
Disconnect the instrument panel integration antenna assembly (telephone antenna) connector [color: wine red].
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
Core wire - Shield
| Always
| 4 to 11 kΩ
|
Text in Illustration*1
| Core wire
|
*2
| Shield
|
| REPLACE INSTRUMENT PANEL INTEGRATION ANTENNA ASSEMBLY (TELEPHONE ANTENNA) |
|
|
Clear the DTCs (HILUX_TGN26 RM0000044SM00EX.html).
Wiggle the instrument panel integration antenna assembly (telephone antenna).
Check for the DTCs (HILUX_TGN26 RM0000044SM00EX.html).
- OK:
- DTC B1573 or B15CB is not output.
8.REPLACE INSTRUMENT PANEL INTEGRATION ANTENNA ASSEMBLY |
Temporarily replace the instrument panel integration antenna assembly with a new or normally functioning one (Refer to the Service Bulletin).
Clear the DTCs (HILUX_TGN26 RM0000044SM00EX.html).
Check for DTCs (HILUX_TGN26 RM0000044SM00EX.html).
- OK:
- DTC B1573 or B15CB is not output.
| REPLACE TELEPHONE TRANSCEIVER |
|
|
OK |
|
|
|
END (INSTRUMENT PANEL INTEGRATION ANTENNA IS DEFECTIVE) |
|