Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Kd-Ftv Engine Control. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Ecm -- Installation |
| 1. INSTALL NO. 2 ECM BRACKET |
Install the No. 2 ECM bracket with the 2 screws.
- Torque:
- 3.0 N*m{31 kgf*cm, 27 in.*lbf}
| 2. INSTALL NO. 1 ECM BRACKET |
Install the No. 1 ECM bracket with the 3 screws.
- Torque:
- 3.0 N*m{31 kgf*cm, 27 in.*lbf}
| 3. INSTALL ECM |
Install the ECM with the bolt and 2 nuts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
Connect the 4 connectors.
| 4. INSTALL 4WD CONTROL ECU (for 4WD) |
Install the 4WD control ECU with the bolt.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
Connect the connector.
| 5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
 |
Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.
Text in Illustration *1 Stopper
Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
Text in Illustration *1 Hinge
 |
| 6. PERFORM REGISTRATION |
Perform registration (HILUX_TGN26 RM0000012XK03ZX.html).
- HINT:
- Only perform registration when the ECM is replaced, either by itself or in any of the following combinations.
- ECM and Fuel Supply Pump
- ECM and Diesel Throttle Body Assembly
- ECM and Injector Assembly
- ECM and Engine Assembly
| 7. START ENGINE |
When replacing the ECM, start the engine to initialize the new ECM (HILUX_TGN26 RM000000TIN04BX.html).