Personal Light Inspection
INSPECT MAP LIGHT ASSEMBLY (w/ Courtesy Light Switch)
INSPECT MAP LIGHT ASSEMBLY (w/o Courtesy Light Switch)
Personal Light -- Inspection |
| 1. INSPECT MAP LIGHT ASSEMBLY (w/ Courtesy Light Switch) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
7 (B) - 10 (E)
| Spot light switch off
| 10 kΩ or higher
|
Spot light switch on
| Below 1 Ω
|
7 (B) - 6 (CTY)
| Not door position
| 10 kΩ or higher
|
Door position
| Below 1 Ω
|
If the result is not as specified, replace the map light assembly.
Text in Illustration*a
| Component without harness connected
(Map Light Assembly)
|
| 2. INSPECT MAP LIGHT ASSEMBLY (w/o Courtesy Light Switch) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
7 (B) - 10 (E)
| Spot light switch off
| 10 kΩ or higher
|
Spot light switch on
| Below 1 Ω
|
If the result is not as specified, replace the map light assembly.
Text in Illustration*a
| Component without harness connected
(Map Light Assembly)
|
