Front Wiper Motor On-Vehicle Inspection

Vehicle Exterior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Wiper Washer. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSPECT WINDSHIELD WIPER LINK ASSEMBLY

Front Wiper Motor -- On-Vehicle Inspection



1. INSPECT WINDSHIELD WIPER LINK ASSEMBLY


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Wiper Washer.Wiper And Washer System.Front Wiper Motor On-Vehicle Inspection

  1. Operate the front wipers while spraying washer fluid on the windshield glass. Make sure that the front wipers function properly and the wipers do not come into contact with the vehicle body.

    Standard:
    Area
    		Standard Condition
    A
    		25.0 mm (0.984 in.)
    B
    		30.4 mm (1.19 in.)
    C
    		24.3 mm (0.956 in.)
    D
    		24.7 mm (0.972 in.)
    E
    		19.0 mm (0.748 in.)

  1. Stop the front wiper motor and link assembly operation.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Wiper Washer.Wiper And Washer System.Front Wiper Motor On-Vehicle Inspection

  1. Check the automatic stop position.

    Text in Illustration
    *A
    		for LH Side
    *B
    		for RH Side
    *1
    		Louver Edge
    OK:
    The front wipers stop at the positions shown in the illustration.
    Standard:
    Area
    		Standard Condition
    A
    		25 mm (0.984 in.)
    B
    		33 mm (1.29 in.)
    C
    		25 mm (0.984 in.)
    D
    		25 mm (0.984 in.)
    If the result is not as specified, remove and reinstall the wiper arm and blade assembly, and perform the on-vehicle inspection described above to inspect the wiper motor and link assembly again.
    If the result is not as specified again, inspect the wiper motor and link assembly with it removed from the vehicle body (HILUX_TGN26 RM00000114B01MX.html).