Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Kd-Ftv Emission Control. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Exhaust Gas Temperature Sensor -- Installation |
| 1. INSTALL NO. 3 EXHAUST GAS TEMPERATURE SENSOR |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor.
- Torque:
- 30 N*m{306 kgf*cm, 22 ft.*lbf}
- NOTICE:
- Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (HILUX_TGN26 RM000004QR1006X.html).
| 2. INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, install the No. 2 exhaust gas temperature sensor.
- Torque:
- 30 N*m{306 kgf*cm, 22 ft.*lbf}
- NOTICE:
- Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (HILUX_TGN26 RM000004QR1006X.html).
Attach the 5 clamps.
Text in Illustration *1 Wire Harness *2 Clamp - HINT:
- Make sure that the part of the wire harness is as shown in the illustration.
 |
| 3. INSTALL EXHAUST GAS TEMPERATURE SENSOR |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, install the exhaust gas temperature sensor.
- Torque:
- 30 N*m{306 kgf*cm, 22 ft.*lbf}
- NOTICE:
- Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (HILUX_TGN26 RM000004QR1006X.html).
- HINT:
- The sensor should be assembled within 20° of the prescribed position on either side.
Text in Illustration *a Top *b LH Side
| 4. INSTALL FRONT EXHAUST PIPE ASSEMBLY |