Oil Pressure Switch Installation

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Tr-Fbe Lubrication. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

  2. INSPECT FOR OIL LEAK

  3. INSPECT ENGINE OIL LEVEL

Oil Pressure Switch -- Installation



1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

  1. Apply adhesive to 2 or 3 threads of the engine oil pressure switch.

    Adhesive:
    Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
    NOTICE:
    Do not let adhesive adhere to the oil hole.

  1. Using a 24 mm deep socket wrench, install the engine oil pressure switch.

    Torque:
    15 N*m{153 kgf*cm, 11 ft.*lbf}
    NOTICE:
    Do not start the engine within 1 hour of installation.

  1. Connect the engine oil pressure switch connector.



2. INSPECT FOR OIL LEAK

  1. Start the engine, and check that there are no oil leaks after performing maintenance.



3. INSPECT ENGINE OIL LEVEL

  1. Warm up the engine, and then stop the engine and wait for 5 minutes.
    If the oil level is low, check for leakage and add oil up to the full level mark.

  1. Check that the engine oil level is between the low level and full level marks on the dipstick.
    If low, check for leakage and add oil up to the full level mark.

    NOTICE:
    Do not fill engine oil above the full level mark.