Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
1Gr-Fe Engine Mechanical. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Cylinder Block -- Replacement |
| 1. REPLACE STRAIGHT PIN |
- NOTICE:
- It is not necessary to remove a straight pin unless it is being replaced.
Remove the straight pins.
Using a plastic-faced hammer, tap in new straight pins to the cylinder block.
- Standard Protrusion Height:
Item Specified Condition Pin A 22.5 to 23.5 mm (0.886 to 0.925 in.) Pin B 10.5 to 11.5 mm (0.413 to 0.453 in.) Pin C 8.5 to 9.5 mm (0.335 to 0.374 in.) Pin D 5.5 to 6.5 mm (0.217 to 0.256 in.)
Text in Illustration *a Front Side *b Rear Side *c Upper Side *d Lower Side
| 2. REPLACE CYLINDER BLOCK TIGHT PLUG |
- NOTICE:
- If coolant leaks from a tight plug or a plug is corroded, replace it.
Remove the tight plugs.
Apply adhesive around new tight plugs.
- Adhesive:
- Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
Using SST and a hammer, tap in the tight plugs to the standard depth.
- SST
- 09950-60010(09951-00350)
09950-70010(09951-07150)
- Standard depth:
- 0.2 to 1.2 mm (0.00787 to 0.0472 in.)
Text in Illustration *1 Standard Depth - - *a RH Side *b LH Side
| 3. REPLACE OIL JET |
- NOTICE:
- It is not necessary to remove the oil jet unless it is being replaced.
Using a screwdriver and hammer, tap out the oil jet.
Using a screwdriver and hammer, tap in a new oil jet as shown in the illustration.
Text in Illustration *a 26 to 27°
 |