Accelerator Pedal On-Vehicle Inspection

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
1Gr-Fe Engine Control. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSPECT ACCELERATOR PEDAL ROD ASSEMBLY

Accelerator Pedal -- On-Vehicle Inspection



1. INSPECT ACCELERATOR PEDAL ROD ASSEMBLY

  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the intelligent tester on.

  1. Enter the following menus: Powertrain / Engine and ECT / Data List / All Data/ Accel Sensor Out No. 1 and Accel Sensor Out No. 2.

  1. Read the value displayed on the intelligent tester.

    Standard Voltage:
    Accelerator Pedal Operation
    		Accel Sensor Out No. 1
    		Accel Sensor Out No. 2
    Released
    		0.5 to 1.1 V
    		1.2 to 2.0 V
    Depressed
    		2.6 to 4.5 V
    		3.4 to 4.98 V
    If the result is not as specified, check the accelerator pedal rod, wire harness and ECM.