Propeller Shaft Assembly (For Tsam Made) Inspection

Drivetrain. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Drive Shaft Propeller Shaft. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSPECT PROPELLER SHAFT AND INTERMEDIATE SHAFT

  2. INSPECT UNIVERSAL JOINT SPIDER ASSEMBLY

  3. INSPECT CENTER NO. 1 SUPPORT BEARING ASSEMBLY

Propeller Shaft Assembly (For Tsam Made) -- Inspection



1. INSPECT PROPELLER SHAFT AND INTERMEDIATE SHAFT


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Drive Shaft Propeller Shaft.Drive Shaft System.Propeller Shaft Assembly (For Tsam Made) Inspection

  1. Using a dial indicator, measure the propeller shaft and intermediate shaft runout.

    Maximum Runout:
    Item
    		Specified Condition
    Propeller shaft
    		0.8 mm (0.0314 in.)
    Intermediate shaft
    		0.8 mm (0.0314 in.)
    If the shaft runout is more than the maximum, replace the shaft.


2. INSPECT UNIVERSAL JOINT SPIDER ASSEMBLY

  1. Clamp the propeller shaft in a vise between aluminum plates.

    NOTICE:
    Do not overtighten the vise.

  1. Check the spider bearings for wear or damage.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Check the axial play of each spider bearing by turning the yoke while holding the shaft tightly.

    Maximum bearing axial play:
    0.05 mm (0.00196 in.)
    If the bearing axial play is more than the maximum, replace the spider bearing.


3. INSPECT CENTER NO. 1 SUPPORT BEARING ASSEMBLY


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. While turning the center bearing by hand, check that it turns smoothly without catching and that there are no cracks or damage.
    If there are any defects, replace the bearing.
    If there is any damage to the lip of the center bearing case, replace the bearing.