Outer Mirror Switch Inspection

Vehicle Exterior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Mirror (Ext). Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSPECT OUTER MIRROR SWITCH ASSEMBLY

Outer Mirror Switch -- Inspection



1. INSPECT OUTER MIRROR SWITCH ASSEMBLY


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Mirror (Ext).Power Mirror Control System.Outer Mirror Switch  Inspection
  1. Inspect the outer mirror switch.

    1. Select "L" on the select switch.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      4 (MLV) - 8 (B)
      6 (M+) - 7 (E)
      UP
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      4 (MLV) - 7 (E)
      6 (M+) - 8 (B)
      DOWN
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      5 (MLH) - 8 (B)
      6 (M+) - 7 (E)
      LEFT
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      5 (MLH) - 7 (E)
      6 (M+) - 8 (B)
      RIGHT
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      If the result is not as specified, replace the outer mirror switch assembly.
    3. Select "R" on the select switch.

    4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      3 (MRV) - 8 (B)
      6 (M+) - 7 (E)
      UP
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      3 (MRV) - 7 (E)
      6 (M+) - 8 (B)
      DOWN
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      2 (MRH) - 8 (B)
      6 (M+) - 7 (E)
      LEFT
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      2 (MRH) - 7 (E)
      6 (M+) - 8 (B)
      RIGHT
      Pressed
      Below 1 Ω
      Not pressed
      10 kΩ or higher
      If the result is not as specified, replace the outer mirror switch assembly.
      Text in Illustration
      *1
      Select Switch
      *a
      Component without harness connected
      (Outer Mirror Switch Assembly)