Vehicle Exterior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Lighting (Ext). Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Headlight Dimmer Switch -- Installation |
| 1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY |
Install the headlight dimmer switch assembly to the steering column, making sure that the stopper protrusions and cutout parts align.
 |
Using needle-nose pliers, install the band clamp as shown in the illustration.
 |
Connect the connector.
| 2. INSTALL WIPER AND WASHER SWITCH ASSEMBLY |
Attach the claw to install the windshield wiper switch assembly.
- NOTICE:
- Do not push the claw with excessive force as damage may occur.
Connect the connectors.
| 3. INSTALL SPIRAL CABLE SUB-ASSEMBLY |
Attach the 3 claws to install the spiral cable sub-assembly.
- NOTICE:
- When replacing the spiral cable with a new one, remove the lock pin before installing the steering wheel assembly.
Remove the stopper (new spiral cable).
- HINT:
- When installing a new spiral cable make sure to remove the stopper.
Connect the connectors.
- NOTICE:
- When handling the airbag connector, do not damage the airbag wire harness.
| 4. INSTALL UPPER STEERING COLUMN COVER |
Attach the claw to install the upper cover.
| 5. INSTALL LOWER STEERING COLUMN COVER |
Install the lower cover with the 3 screws.
| 6. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Attach the 3 guides, 2 claws and 3 clips to install the lower instrument panel finish panel.
| 7. INSTALL STEERING WHEEL ASSEMBLY |