Rear Bumper (For Flat Type) -- Reassembly |
| 1. INSTALL REAR BUMPER BAR PLATE |
- HINT:
- When installing the rear bumper bar plate, heat the rear bumper and rear bumper bar plate using a heat light.
- Standard:
Item Temperature Rear Bumper 20 to 30°C (68 to 86°F) Rear Bumper Bar Plate 20 to 30°C (68 to 86°F)
- NOTICE:
- Do not heat the rear bumper or rear bumper bar plate excessively.
When using a new rear bumper bar plate:
Clean the rear bumper surface.
Using a heat light, heat the rear bumper surface.
When reusing the rear bumper bar plate:
Using a heat light, heat the rear bumper surface and rear bumper bar plate surface.
Remove the double-sided tape from the rear bumper and rear bumper bar plate.
Wipe off any tape adhesive residue with cleaner.
Install a new double-sided tape in the position shown in the illustration.
Text in Illustration *1 Double-sided Tape
Install the rear bumper bar plate.
Remove the peeling paper from the face of the rear bumper bar plate.
- HINT:
- After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Attach the 7 claws to install the rear bumper bar plate.
| 2. INSTALL REAR BUMPER PLATE LH |
Attach the 2 claws to install the rear bumper plate.
| 3. INSTALL REAR BUMPER PLATE RH |
- HINT:
- Use the same procedure described for the LH side.
| 4. INSTALL REAR BUMPER PLATE |
Attach the 13 claws to install the rear bumper plate.
| 5. INSTALL REAR BUMPER ARM LH |
Install the rear bumper arm with the 2 bolts.
- Torque:
- 45 N*m{459 kgf*cm, 33 ft.*lbf}
| 6. INSTALL REAR BUMPER ARM RH |
- HINT:
- Use the same procedure described for the LH side.
| 7. INSTALL LICENSE PLATE LIGHT ASSEMBLY |
Attach the 2 claws to install the license plate light assembly.
Connect the connector.