Exhaust Pipe (W/O Dpf) Installation

Using a vernier caliper, measure the free length of the compression spring.

Minimum length:

40 mm (1.57 in.)

Install the front exhaust pipe to the exhaust pipe support.

Install a new gasket to the turbine outlet elbow.

NOTICE:

1. Be careful with the installation direction of the gasket.
   

1. Do not reuse the gasket.
   

1. To ensure a proper seal, do not use the front exhaust pipe to force the gasket onto the turbine outlet elbow.
   

HINT:

Using a plastic-faced hammer, uniformly strike the gasket so that the gasket and outlet pipe are properly fit.

Install the front exhaust pipe and 2 compression springs with the 2 bolts. Alternately tighten the bolts in several passes.

Torque:

43 N*m{438 kgf*cm, 32 ft.*lbf}

Install the center exhaust pipe to the 3 exhaust pipe supports.

Install a new gasket and connect the center exhaust pipe to the front exhaust pipe with the 2 bolts and 2 nuts. Alternately tighten the bolts in several passes.

Torque:

48 N*m{489 kgf*cm, 35 ft.*lbf}

NOTICE:

Do not reuse the gasket.

Install the tailpipe to the exhaust pipe support.

Install a new gasket and connect the tailpipe to the center exhaust pipe with the 2 bolts and 2 nuts. Alternately tighten the bolts in several passes.

Torque:

48 N*m{489 kgf*cm, 35 ft.*lbf}

NOTICE:

Do not reuse the gasket.