Vehicle Interior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Seat Belt. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Front Seat Outer Belt Assembly (For Single Cab) -- Removal |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. REMOVE FRONT SEAT ASSEMBLY |
for Separate Seat:
(HILUX_TGN26 RM000000Z8U08XX.html)
for Bench Seat Type:
(HILUX_TGN26 RM000000Z9000EX.html)
| 2. REMOVE FRONT DOOR SCUFF PLATE LH |
 |
Put protective tape around the front door scuff plate.
Text in Illustration *1 Protective Tape
Using a moulding remover, detach the 4 clips and 8 claws and remove the front door scuff plate.
| 3. REMOVE FRONT DOOR OPENING TRIM LH |
Partially remove the front door opening trim LH so that the lower quarter trim panel LH can be removed (HILUX_TGN26 RM00000148O013X_01_0004.html).
| 4. REMOVE LOWER QUARTER TRIM PANEL LH |
Remove the bolt and disconnect the seat outer belt floor anchor.
 |
Using a clip remover, detach the 3 clips and remove the lower quarter trim panel LH.
 |
| 5. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH |
 |
Remove the shoulder anchor.
Using a screwdriver, detach the 2 claws and open the cover.
- HINT:
- Tape the screwdriver tip before use.
Remove the bolt and front seat outer belt shoulder anchor.
Text in Illustration *1 Protective Tape *a Open
Remove the bolt and front seat outer belt assembly LH.
 |