Shift Lever Installation

Drivetrain. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
A340F Automatic Transmission Transaxle. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSTALL SHIFT LEVER ASSEMBLY

  2. ADJUST SHIFT LEVER POSITION

  3. INSPECT SHIFT LEVER POSITION

  4. INSTALL FRONT CONSOLE BOX

Shift Lever -- Installation



1. INSTALL SHIFT LEVER ASSEMBLY


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.A340F Automatic Transmission Transaxle.Automatic Transmission System.Shift Lever Installation

  1. Install the shift lever with the 4 bolts. Tighten the bolts in the order shown in the illustration.

    Torque:
    14 N*m{143 kgf*cm, 10 ft.*lbf}

  1. Connect the clamp and 2 connectors.

  1. Move the shift lever to L.

  1. Connect the transmission control cable.



2. ADJUST SHIFT LEVER POSITION


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.A340F Automatic Transmission Transaxle.Automatic Transmission System.Shift Lever Installation

  1. Move the shift lever to N.

  1. Remove the nut and disconnect the control cable.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.A340F Automatic Transmission Transaxle.Automatic Transmission System.Shift Lever Installation

  1. Turn the control shaft lever clockwise until it stops, and then turn it counterclockwise 2 notches to set it to the N position.

  1. While holding the control shaft lever slightly toward the R position side, connect the cable with the nut.

    Torque:
    16 N*m{163 kgf*cm, 12 ft.*lbf}


3. INSPECT SHIFT LEVER POSITION

  1. When moving the shift lever from P to R with the ignition switch ON and the brake pedal depressed, make sure that the shift lever moves smoothly and correctly into position.

  1. Start the engine and make sure that the vehicle moves forward after moving the shift lever from N to D, and moves rearward after shifting to the R.
    If the results are not as specified, inspect the park/neutral position switch and check the shift lever.



4. INSTALL FRONT CONSOLE BOX
(HILUX_TGN26 RM000003NEA00QX.html)