Transmission Wire Installation

Drivetrain. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
A340F Automatic Transmission Transaxle. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSTALL TRANSMISSION WIRE

  2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

  3. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

  4. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY

  5. ADD AUTOMATIC TRANSMISSION FLUID

  6. INSPECT AUTOMATIC TRANSMISSION FLUID

Transmission Wire -- Installation


NOTICE:
When working with FIPG material, perform the following:
  1. Using a razor blade and gasket scraper, remove all old FIPG material from the gasket surfaces.
  2. Clean all components thoroughly to remove all foreign matter.
  3. Clean both sealing surfaces with a non-residue solvent.
  4. Apply FIPG material in a continuous line approximately 2 to 3 mm (0.0787 to 0.118 in.) in diameter on the sealing surface.
  5. Reassemble parts within 10 minutes of applying FIPG material. Failing to do so will require the FIPG material to be removed and reapplied.


1. INSTALL TRANSMISSION WIRE
  1. Coat a new O-ring with ATF, and install it to the transmission wire.

  1. Install the transmission wire to the case, and install the stopper plate with the bolt.

    Torque:
    5.4 N*m{55 kgf*cm, 48 in.*lbf}
  1. Connect the 4 connectors to the 4 shift solenoid valves.



2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.A340F Automatic Transmission Transaxle.Automatic Transmission System.Transmission Wire  Installation
  1. Install 3 new gaskets.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.A340F Automatic Transmission Transaxle.Automatic Transmission System.Transmission Wire  Installation
  1. Install the oil strainer with the 4 bolts.

    Torque:
    10 N*m{110 kgf*cm, 8 ft.*lbf}
    HINT:
    Bolt length:
    14 mm (0.55 in.) for A
    20 mm (0.79 in.) for B
    23 mm (0.91 in.) for C


3. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.A340F Automatic Transmission Transaxle.Automatic Transmission System.Transmission Wire  Installation
Text in Illustration
*1
Magnet
HINT:
Remove any packing material and be careful not to spill oil on the contacting surfaces of the transmission case and oil pan.
  1. Install the 3 magnets to the locations indicated in the illustration.

  1. Apply FIPG to the oil pan as shown in the illustration.

    FIPG:
    Toyota Genuine Seal Packing 1281, Three Bond 1281 or equivalent
  1. Install the oil pan with the 19 bolts.

    Torque:
    7.4 N*m{75 kgf*cm, 65 in.*lbf}


4. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY
  1. Coat a new O-ring with ATF, and install it to the oil filler tube.

  1. Install the oil filler tube with the 2 bolts.

    Torque:
    12 N*m{122 kgf*cm, 9 ft.*lbf}
  1. Install the oil level dipstick.



5. ADD AUTOMATIC TRANSMISSION FLUID
Fluid type:
Toyota Genuine ATF Type T-IV


6. INSPECT AUTOMATIC TRANSMISSION FLUID
(HILUX_TGN26 RM0000014P801LX.html)