Brake. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Brake System (Other). Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Brake System -- Precaution |
- NOTICE:
- Take extra care to replace each part properly. Improper installation or repair could affect the performance of the brake system and cause a driving hazard.
- It is very important to keep the brake system parts and the work area clean when repairing the brake system.
- If the vehicle is equipped with a mobile communication system, refer to the Precautions in the INTRODUCTION section.
- Care must be taken when using magnets as it could affect the performance of the speed sensors.
- Since the brake line is one of the critical safety related parts, be sure to disassemble the components if a brake fluid leak is found. If any abnormality is found, replace the component with a new one.
- When removing brake components, cover the brake tube connections to prevent foreign matter, such as dust or dirt, from entering the tubes.
- Do not damage or deform the brake tubes when removing or installing them.
- When installing a brake tube grommet to the body, make sure that the brake tube passes through the center of the grommet.
- When installing a brake tube or flexible hose, make sure that it is not twisted or bent.
- If the cap of the flexible hose does not match the groove on the bracket, twist the hose slightly to insert it.
- Do not reuse a clip removed from a flexible hose.
- Flexible hoses must be free from absorber oil, grease, etc.
- When installing a brake tube to a plastic clamp, make sure that the brake tube is not loose or pinched.
- Do not reuse a clip or plastic clamp removed from a flexible hose.
- After installing a brake tube and flexible hose, make sure that they do not interfere with any other components.
- Do not allow brake fluid to adhere to any painted surface such as the vehicle body. If brake fluid leaks onto any painted surface, immediately wash it off.