REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY (for Pre-Runner)
REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY (for 4WD)
Propeller Shaft Assembly (For Tasa Made) -- Removal |
| 1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY (for Pre-Runner) |
Place matchmarks on the propeller shaft flange and differential flange.
Text in Illustration *1 Matchmark
 |
Remove the 4 nuts, 4 bolts and 4 washers and disconnect the propeller shaft.
Remove the 2 set bolts and 2 plates of the center support bearing from the frame crossmember.
 |
Pull out the propeller shaft.
Install SST to the extension housing to prevent oil leakage.
- SST
- 09325-40010
 |
| 2. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY (for 4WD) |
Place matchmarks on the propeller shaft flange and transfer flange.
Text in Illustration *1 Matchmark
 |
Remove the 4 nuts and 4 washers and disconnect the propeller shaft.
Place matchmarks on the propeller shaft flange and differential flange.
Text in Illustration *1 Matchmark
|
Remove the 4 nuts, 4 bolts and 4 washers.
Remove the 2 set bolts and 2 plates of the center support bearing from the frame crossmember.
|
Remove the propeller shaft.