Crankshaft Position Sensor Inspection

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Tr-Fe Engine Control. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSPECT CRANKSHAFT POSITION SENSOR

Crankshaft Position Sensor -- Inspection



1. INSPECT CRANKSHAFT POSITION SENSOR


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.2Tr-Fe Engine Control.Sfi System (W/ Secondary Air Injection System).Crankshaft Position Sensor Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 (NE) - 2 (NE-)
    		Cold
    		1630 to 2740 Ω
    Hot
    		2065 to 3225 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Crankshaft Position Sensor)
    HINT:
    In the table above, the terms "cold" and "hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).
    If the result is not as specified, replace the crankshaft position sensor.