Outer Mirror Switch Inspection

Vehicle Exterior. Corolla. Zre142 Aze141
Mirror (Ext). Corolla. Zre142 Aze141

  1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror)

  2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)

Outer Mirror Switch -- Inspection



1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror)


    Corolla. Zre142 Aze141.Mirror (Ext).Power Mirror Control System.Outer Mirror Switch Inspection

  1. Inspect the outer mirror switch assembly.

    1. Select "L" on the mirror select switch.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance (for Left Side):
      Tester Connection
      		Switch Condition
      		Specified Condition
      E17-4 (VL) - E17-8 (B)
      E17-6 (M+) - E17-7 (E)
      		UP
      		Below 1 Ω
      OFF
      		10 kΩ or higher
      E17-4 (VL) - E17-7 (E)
      E17-6 (M+) - E17-8 (B)
      		DOWN
      		Below 1 Ω
      OFF
      		10 kΩ or higher
      E17-5 (HL) - E17-8 (B)
      E17-6 (M+) - E17-7 (E)
      		LEFT
      		Below 1 Ω
      OFF
      		10 kΩ or higher
      E17-5 (HL) - E17-7 (E)
      E17-6 (M+) - E17-8 (B)
      		RIGHT
      		Below 1 Ω
      OFF
      		10 kΩ or higher
      If the result is not as specified, replace the switch assembly.

    3. Select "R" on the mirror select switch.

    4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance (for Right Side):
      Tester Connection
      		Switch Condition
      		Specified Condition
      E17-3 (VR) - E17-8 (B)
      E17-6 (M+) - E17-7 (E)
      		UP
      		Below 1 Ω
      OFF
      		10 kΩ or higher
      E17-3 (VR) - E17-7 (E)
      E17-6 (M+) - E17-8 (B)
      		DOWN
      		Below 1 Ω
      OFF
      		10 kΩ or higher
      E17-2 (HR) - E17-8 (B)
      E17-6 (M+) - E17-7 (E)
      		LEFT
      		Below 1 Ω
      OFF
      		10 kΩ or higher
      E17-2 (HR) - E17-7 (E)
      E17-6 (M+) - E17-8 (B)
      		RIGHT
      		Below 1 Ω
      OFF
      		10 kΩ or higher
      Text in Illustration
      *a
      		Component without harness connected
      (Outer Mirror Switch Assembly)
      *1
      		Mirror Select Switch
      If the result is not as specified, replace the switch assembly.


2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)


    Corolla. Zre142 Aze141.Mirror (Ext).Power Mirror Control System.Outer Mirror Switch Inspection

  1. Inspect the outer mirror switch assembly.

    1. Select "L" on the mirror select switch

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      E17-4 (VL) - E17-8 (B)
      E17-6 (M+) - E17-7 (E)
      		UP
      		Below 1Ω
      OFF
      		10 kΩ or higher
      E17-4 (VL) - E17-7 (E)
      E17-6 (M+) - E17-8 (B)
      		DOWN
      		Below 1Ω
      OFF
      		10 kΩ or higher
      E17-5 (HL) - E17-8 (B)
      E17-6 (M+) - E17-7 (E)
      		LEFT
      		Below 1Ω
      OFF
      		10 kΩ or higher
      E17-5 (HL) - E17-7 (E)
      E17-6 (M+) - E17-8 (B)
      		RIGHT
      		Below 1Ω
      OFF
      		10 kΩ or higher
      If the result is not as specified, replace the outer mirror switch assembly.

    3. Select "R" on the mirror select switch.

    4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      E17-3 (VR) - E17-8 (B)
      E17-6 (M+) - E17-7 (E)
      		UP
      		Below 1Ω
      OFF
      		10 kΩ or higher
      E17-3 (VR) - E17-7 (E)
      E17-6 (M+) - E17-8 (B)
      		DOWN
      		Below 1Ω
      OFF
      		10 kΩ or higher
      E17-2 (HR) - E17-8 (B)
      E17-6 (M+) - E17-7 (E)
      		LEFT
      		Below 1Ω
      OFF
      		10 kΩ or higher
      E17-2 (HR) - E17-7 (E)
      E17-6 (M+) - E17-8 (B)
      		RIGHT
      		Below 1Ω
      OFF
      		10 kΩ or higher
      If the result is not as specified, replace the outer mirror switch assembly.

  1. Inspect the retract switch.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      E17-7 (E) - E17-10 (MF)
      E17-8 (B) - E17-9 (MR)
      		Pushed in
      		Below 1Ω
      E17-7 (E) - E17-9 (MR)
      E17-8 (B) - E17-10 (MF)
      		Not pushed in
      		10 kΩ or higher
      Text in Illustration
      *a
      		Component without harness connected
      (Outer Mirror Switch Assembly)
      *1
      		Mirror Retract Switch
      If the result is not as specified, replace the outer mirror switch.