Heated Oxygen Sensor Installation

Using SST, install the heated oxygen sensor onto the front exhaust pipe.

SST

09224-00010

Torque:

without SST:

44 N*m{449 kgf*cm, 32 ft.*lbf}

with SST:

40 N*m{408 kgf*cm, 30 ft.*lbf}

NOTICE:

1. This torque value can be obtained by using a torque wrench with a fulcrum length of 300 mm (11.81 in.) and SST a measurement of 30 mm (1.18 in.) (COROLLA_ZRE142 RM000000UYX0ETX.html).
   
2. This torque value is effective when SST is parallel to the torque wrench.
   

Install the wire harness clamp bracket and connect the wire harness clamp.

Pass the sensor connector through the floor panel and install the grommet.

Connect the heated oxygen sensor connector.