Engine Hybrid System. Corolla. Zre142 Aze141
2Zr-Fe Starting. Corolla. Zre142 Aze141
Engine Switch -- Installation |
| 1. INSTALL ENGINE SWITCH |
Engage the 2 claws to install the engine switch.
 |
| 2. INSTALL NO. 1 SWITCH HOLE BASE |
Connect the connector.
 |
Engage the 3 claws and install the No. 1 switch hole base.
| 3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
Engage the 5 claws, 2 clips and 2 guides.
 |
Install the lower instrument panel finish panel sub-assembly with the 2 screws <B>.
 |
| 4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover) |
Engage the guide.
 |
Engage the 3 claws and install the No. 2 instrument panel under cover sub-assembly.
| 5. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
Engage the guide, claw and 3 clips, and install the instrument cluster finish panel assembly.
 |
Remove the applied protective tape on the steering column cover.
| 6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH |
Engage the 2 claws and 2 clips, and then install the instrument panel finish panel end LH.
 |
| 7. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH |
Engage the 3 claws and clip, and then install the lower instrument panel finish panel LH.
 |
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- HINT:
| 9. INSPECT SRS WARNING LIGHT |