Ecm Installation

Install the 2 ECM brackets onto the ECM with the 4 screws.

Install the ECM with the 3 bolts.

Torque:

8.0 N*m{82 kgf*cm, 71 in.*lbf}

Connect the 2 ECM connectors.

1. Connect the 2 ECM connectors and lower the 2 levers.
   

   NOTICE:

   1. When connecting the connectors, make sure that dirt, water or other foreign matter does not get caught between the connectors and other parts.
      
   2. Make sure that the 2 levers are securely locked.
      

Install the wire harness clamp.

Install the air cleaner case with the 3 bolts.

Torque:

7.0 N*m{71 kgf*cm, 62 in.*lbf}

Install the engine wire clamp to the air cleaner case.

Install the air cleaner filter element.

Install the air cleaner cap sub-assembly with hose and lock the 3 clamps.

Tighten the air cleaner hose clamp.

Connect the ventilation hose.

Connect the 2 vacuum hoses and No. 1 vacuum switching valve connector.

Connect the 2 wire harness clamps and the mass air flow meter connector.

Install the No. 1 engine cover sub-assembly with the 2 nuts.

Connect the cable to the negative battery terminal.

Torque:

5.4 N*m{55 kgf*cm, 48 in.*lbf}