INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (w/o Front No. 2 Speaker)
INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (w/ Front No. 2 Speaker)
INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)
Front Door Belt Moulding -- Installation |
- HINT:
- Use the same procedure for the RH side and LH side.
- The procedure listed below is for the LH side.
| 1. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY |
Engage the 5 claws and clip, and install the front door belt moulding assembly.
 |
| 2. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY |
Insert the front door glass sub-assembly into the front door panel along the front door glass run as shown in the illustration.
 |
Install the front door glass sub-assembly with the 2 bolts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
 |
| 3. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER |
Engage the claw, and temporarily install the outer rear view mirror assembly with cover.
 |
Install the 3 bolts.
- Torque:
- 9.0 N*m{92 kgf*cm, 80 in.*lbf}
Engage the clamp and connect the connector.
| 4. INSTALL FRONT DOOR SERVICE HOLE COVER |
Apply butyl tape to the front door panel.
Pass the front door lock remote control cable and rear door inside locking cable through a new front door service hole cover.
Attach the front door service hole cover according to the reference points on the front door panel.
- NOTICE:
- Securely install the front door service hole cover preventing wrinkles and air bubbles.
 |
w/ Power door lock:
Connect the connector.
| 5. INSTALL FRONT DOOR TRIM BRACKET |
Install the front door trim bracket with the 2 screws.
 |
| 6. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP |
Install the front door inner glass weatherstrip.
 |
| 7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (w/o Front No. 2 Speaker) |
Engage the clip and clamp, and install the front door lower frame bracket garnish.
 |
| 8. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (w/ Front No. 2 Speaker) |
Connect the connector.
Engage the clip and clamp, and install the front door lower frame bracket garnish.
 |
| 9. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY |
Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.
 |
Engage the 2 claws and install the front door inside handle sub-assembly to the front door trim board.
 |
| 10. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY |
Engage the front door trim board with the 5 claws on the front door inner glass weatherstrip.
 |
Engage the 10 clips and install the front door trim board to the front door panel.
Install the 2 screws.
 |
Engage the claw to install the door armrest cap.
 |
| 11. INSTALL FRONT ARMREST UPPER BASE PANEL (w/o Power Window) |
Engage the 2 clips and 6 claws, and install the front armrest upper base panel.
 |
w/ Power Door Lock:
Connect the connector.
| 12. INSTALL FRONT ARMREST UPPER BASE PANEL (w/ Power Window) |
Connect the connector.
Engage the 2 clips and 6 claws, and install the front armrest upper base panel.
 |
| 13. INSTALL FRONT DOOR INSIDE HANDLE BEZEL |
Engage the 3 claws and install the front door inside handle bezel.
 |
| 14. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) |
Temporarily install the front door window regulator handle assembly and fully close the window glass.
Install the front door regulator inside handle plate.
Install the snap ring to the front door window regulator handle assembly.
Install the front door window regulator handle assembly as shown in the illustration.
 |