Rear Brake (For Drum Type) Removal

Brake. Corolla. Zre142 Aze141
Brake (Rear). Corolla. Zre142 Aze141

  1. REMOVE REAR WHEEL

  2. REMOVE REAR BRAKE DRUM

  3. REMOVE REAR BRAKE SHOE (for Front Side)

  4. REMOVE REAR BRAKE STRUT SET

  5. REMOVE REAR BRAKE SHOE (for Rear Side)

  6. REMOVE REAR BRAKE AUTOMATIC ADJUST LEVER

  7. REMOVE REAR BRAKE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY

  8. DRAIN BRAKE FLUID

  9. REMOVE REAR DRUM BRAKE BLEEDER PLUG CAP

  10. REMOVE REAR DRUM BRAKE BLEEDER PLUG

  11. REMOVE REAR WHEEL BRAKE CYLINDER ASSEMBLY (dummy dummy)

Rear Brake (For Drum Type) -- Removal


HINT:
  1. Use the same procedure for the LH side and RH side.
  2. The following procedure listed is for the LH side.
  3. The rear wheel brake cylinder assemblies can be disassembled and inspected with the rear wheel brake cylinder assemblies installed to the backing plate. It is not necessary to remove the rear wheel brake cylinder assemblies from the backing plates except when the rear wheel brake cylinder assemblies should be replaced.


1. REMOVE REAR WHEEL


2. REMOVE REAR BRAKE DRUM


    Corolla. Zre142 Aze141.Brake (Rear).Rear Brake (For Disc Type).Rear Brake (For Drum Type) Removal

  1. Release the parking brake and remove the rear brake drum.

    HINT:
    If the rear brake drum cannot be removed easily, perform the following procedure.

    1. Remove the shoe adjusting hole plug and insert a screwdriver through the hole into the backing plate, and hold the automatic adjust lever away from the adjuster.

    2. Using another screwdriver, contract the brake shoe by turning the adjusting bolt.



3. REMOVE REAR BRAKE SHOE (for Front Side)


    Corolla. Zre142 Aze141.Brake (Rear).Rear Brake (For Disc Type).Rear Brake (For Drum Type) Removal

  1. Using SST, separate the shoe return spring from the rear brake shoe.

    SST
    09921-00010
    NOTICE:
    Do not damage the wheel cylinder boot.


    Corolla. Zre142 Aze141.Brake (Rear).Rear Brake (For Disc Type).Rear Brake (For Drum Type) Removal

  1. Using SST, remove the 2 shoe hold down spring cups, shoe hold down spring, pin and rear brake shoe.

    SST
    09718-00011

  1. Remove the tension spring.



4. REMOVE REAR BRAKE STRUT SET


    Corolla. Zre142 Aze141

  1. Remove the shoe return spring from the rear brake shoe and remove the rear brake shoe strut set.



5. REMOVE REAR BRAKE SHOE (for Rear Side)


    Corolla. Zre142 Aze141.Brake (Rear).Rear Brake (For Disc Type).Rear Brake (For Drum Type) Removal

  1. Using SST, remove the 2 shoe hold down spring cups, shoe hold down spring, pin and rear brake shoe.

    SST
    09718-00011


    Corolla. Zre142 Aze141

  1. Using needle-nose pliers, separate the parking brake cable.



6. REMOVE REAR BRAKE AUTOMATIC ADJUST LEVER


    Corolla. Zre142 Aze141

  1. Remove the rear brake automatic adjust lever tension spring and rear brake automatic adjust lever.



7. REMOVE REAR BRAKE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY


    Corolla. Zre142 Aze141

  1. Using a screwdriver, remove the C-washer and rear brake parking brake shoe lever sub-assembly.



8. DRAIN BRAKE FLUID
NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.


9. REMOVE REAR DRUM BRAKE BLEEDER PLUG CAP


10. REMOVE REAR DRUM BRAKE BLEEDER PLUG


11. REMOVE REAR WHEEL BRAKE CYLINDER ASSEMBLY (dummy dummy)


    Corolla. Zre142 Aze141

  1. Using a union nut wrench (10 mm), disconnect the brake line from the rear brake wheel cylinder assembly.



    Corolla. Zre142 Aze141

  1. Remove the 2 bolts and rear wheel brake cylinder assembly from the backing plate.