Accelerator Pedal On-Vehicle Inspection

Engine Hybrid System. Corolla. Zre142 Aze141
2Zr-Fe Engine Control. Corolla. Zre142 Aze141

  1. INSPECT ACCELERATOR PEDAL

Accelerator Pedal -- On-Vehicle Inspection



1. INSPECT ACCELERATOR PEDAL

  1. Connect the Techstream to the DLC3.

  1. Turn the ignition switch to ON and turn the Techstream on.

  1. Enter the following menus: Powertrain / Engine and ECT / Data List / Accelerator Position No. 1, Accelerator Position No. 2.

  1. Read the values displayed on the Techstream.

    Accelerator Position No. 1 Standard Voltage:
    Condition
    		Specified Condition
    Accelerator pedal is released
    		0.5 to 1.1 V
    Accelerator pedal is depressed
    		2.6 to 4.5 V
    Accelerator Position No. 2 Standard Voltage:
    Condition
    		Specified Condition
    Accelerator pedal is released
    		1.2 to 2.0 V
    Accelerator pedal is depressed
    		3.4 to 5.0 V
    If the result is not as specified, check the accelerator pedal, wire harness and ECM.