Audio And Visual System (W/ Multi-Display With Dvd Player) Microphone Circuit Between Microphone And Radio Receiver
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
INSPECT NAVIGATION RECEIVER ASSEMBLY
CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - TELEPHONE MICROPHONE ASSEMBLY)
AUDIO AND VISUAL SYSTEM (w/ Multi-display with DVD Player) - Microphone Circuit between Microphone and Radio Receiver |
DESCRIPTION
This circuit sends a microphone signal from the telephone microphone assembly to the navigation receiver assembly.It also supplies power from the navigation receiver assembly to the telephone microphone assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.INSPECT NAVIGATION RECEIVER ASSEMBLY |
Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection
| Condition
| Specified Condition
|
E116-17 (MACC) - Body ground
| Ignition switch ACC
| 4 to 6 V
|
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
E116-18 (SGND) - Body ground
| Always
| Below 1 Ω
|
E116-20 (MIC-) - Body ground
| Always
| Below 1 Ω
|
Text in Illustration*a
| Component with harness connected
(Navigation Receiver Assembly)
|
| 2.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - TELEPHONE MICROPHONE ASSEMBLY) |
Disconnect the E116 navigation receiver assembly connector.
Disconnect the O9 telephone microphone assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
E116-5 (SNS2) - O9-3 (SNS2)
| Always
| Below 1 Ω
|
E116-17 (MACC) - O9-1 (MACC)
| Always
| Below 1 Ω
|
E116-19 (MIC+) - O9-2 (MIC+)
| Always
| Below 1 Ω
|
E116-20 (MIC-) - O9-4 (MIC-)
| Always
| Below 1 Ω
|
E116-5 (SNS2) - Body ground
| Always
| 10 kΩ or higher
|
E116-17 (MACC) - Body ground
| Always
| 10 kΩ or higher
|
E116-19 (MIC+) - Body ground
| Always
| 10 kΩ or higher
|
E116-20 (MIC-) - Body ground
| Always
| 10 kΩ or higher
|
E116-18 (SGND) - Body ground
| Always
| 10 kΩ or higher
|
| | REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
