Engine Hybrid System. Corolla. Zre142 Aze141
2Az-Fe Engine Mechanical. Corolla. Zre142 Aze141
REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for Automatic Transaxle)
REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transaxle)
Rear Crankshaft Oil Seal -- Removal |
| 1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for Automatic Transaxle) |
- HINT:
- COROLLA_ZRE142 RM000000YWV032X_01_0075.html for U250E.
| 2. REMOVE MANUAL TRANSAXLE ASSEMBLY (for Manual Transaxle) |
- HINT:
| 3. REMOVE CLUTCH COVER ASSEMBLY (for Manual Transaxle) |
- HINT:
| 4. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transaxle) |
- HINT:
| 5. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transaxle) |
Using SST, hold the crankshaft.
- SST
- 09213-54015(91651-60855)
09330-00021
 |
Remove the 8 bolts, rear drive plate spacer, drive plate and front drive plate spacer.
 |
| 6. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transaxle) |
Using SST, hold the crankshaft.
- SST
- 09213-54015(91651-60855)
09330-00021
|
Remove the 8 bolts and flywheel.
 |
| 7. REMOVE REAR CRANKSHAFT OIL SEAL |
Using a knife, cut off the lip of the oil seal.
 |
Using a screwdriver, pry out the oil seal.
- NOTICE:
- After removing, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.
- HINT:
- Tape the screwdriver tip before use.