Rear Stabilizer Bar Installation
INSTALL REAR STABILIZER BAR (for TMC Made)
INSTALL REAR STABILIZER BAR (except TMC Made)
INSTALL REAR AXLE BEAM DAMPER
Rear Stabilizer Bar -- Installation |
| 1. INSTALL REAR STABILIZER BAR (for TMC Made) |
Check that the identification mark of the rear stabilizer bar is positioned on the right side of the vehicle.
Install the rear stabilizer bar with the 2 bolts and 2 nuts.
- Torque:
- 250 N*m{2549 kgf*cm, 184 ft.*lbf}
- NOTICE:
- Be sure to tighten the nuts.
- If reusing the bolts, insert them from the upper side of the vehicle.
| 2. INSTALL REAR STABILIZER BAR (except TMC Made) |
Check that the identification mark of the rear stabilizer bar is positioned on the left side of the vehicle.
Install the rear stabilizer bar with the 2 bolts and 2 nuts.
- Torque:
- 250 N*m{2549 kgf*cm, 184 ft.*lbf}
- NOTICE:
- Be sure to tighten the nuts.
- If reusing the bolts, insert them from the upper side of the vehicle.
| 3. INSTALL REAR AXLE BEAM DAMPER |
Install the rear axle beam damper to the center of the rear stabilizer bar.
