Navigation System Cd Sound Skips

INSPECTION PROCEDURE

CHECK CD

CHECK CD

REPLACE CD AND RECHECK

CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

INSPECTION PROCEDURE

NOTICE:

After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).

1. Check that the CD is not deformed or cracked.
   

   OK:

   No deformation or cracks on the CD
   

1. Check the CD.
   

   OK:

   The CD is clean.
   

   NOTICE:

   Do not use a conventional record cleaner or anti-static preservative.

   HINT:

   If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

1. Replace the CD with a known good one and check that the malfunction disappears.
   

   OK:

   Malfunction disappears.
   

1. Check the radio and display receiver assembly installation condition.
   

   1. Check that the radio and display receiver assembly is properly installed.
      

      OK:

      The radio and display receiver assembly is properly installed.