Oil Pump Reassembly

Coat the drive rotor and driven rotor with engine oil.

Place the drive and driven rotors into the oil pump with the marks facing the pump cover side.

Install the oil pump cover with the 5 bolts.

Torque:

8.8 N*m{90 kgf*cm, 78 in.*lbf}

Coat the relief valve with engine oil.

Insert the relief valve and spring into the pump body hole.

Using a 27 mm socket wrench, install the plug.

Torque:

49 N*m{500 kgf*cm, 36 ft.*lbf}

Install a new gasket and the oil strainer with the 2 nuts.

Torque:

8.8 N*m{90 kgf*cm, 78 in.*lbf}