REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)
REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (w/o Front No. 2 Speaker)
REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (w/ Front No. 2 Speaker)
Outer Rear View Mirror -- Removal |
| 1. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) |
Using a clip remover, remove the snap ring.
 |
Remove the front door window regulator handle assembly and front door regulator inside handle plate.
| 2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL |
Using a moulding remover, disengage the 3 claws and remove the front door inside handle bezel.
 |
| 3. REMOVE FRONT ARMREST UPPER BASE PANEL (w/o Power Window) |
Using a moulding remover, disengage the 2 clips and 6 claws, and remove the front armrest upper base panel.
 |
w/ Power Door Lock:
Disconnect the connector.
| 4. REMOVE FRONT ARMREST UPPER BASE PANEL (w/ Power Window) |
Using a moulding remover, disengage the 2 clips and 6 claws.
 |
Disconnect the connector and remove the front armrest upper base panel.
| 5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw and disconnect the door armrest cap.
 |
Remove the 2 screws.
 |
Using a clip remover, disengage the 10 clips.
 |
Disengage the 5 claws and separate the front door trim board sub-assembly from the front door inner glass weatherstrip.
Disengage the 2 claws and disconnect the front door inside handle sub-assembly.
 |
| 6. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (w/o Front No. 2 Speaker) |
Disengage the clip and clamp, and remove the front door lower frame bracket garnish.
 |
| 7. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (w/ Front No. 2 Speaker) |
Disengage the clip and clamp.
 |
Disconnect the connector and remove the front door lower frame bracket garnish.
| 8. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER |
Disconnect the clamp and connector.
 |
Remove the 3 bolts.
Disengage the claw and remove the outer rear view mirror assembly with cover.
| 9. REMOVE OUTER MIRROR GLASS (for TMC Made) |
Apply protective tape to the bottom of the visor of the door mirror.
 |
Push the upper part of the mirror surface and tilt it.
Using a moulding remover, disengage the 2 claws.
Disengage the 2 guides at the upper part of the outer mirror as shown in the illustration.
 |
w/ Heater:
Disconnect the connectors.
Remove the outer mirror glass.
| 10. REMOVE OUTER MIRROR COVER (for TMC Made) |
Disengage the 7 claws and remove the outer mirror cover from the outer rear view mirror assembly with cover.
 |
| 11. REMOVE OUTER MIRROR COVER (except TMC Made) |
Put protective tape around the outer mirror cover.
 |
Push the lower part of the mirror surface and tilt it.
 |
Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws B, from the clearance between the outer mirror glass and visor.
Disengage the claw A.
Disengage the 4 claws and remove the outer mirror cover.
 |